Dunbier marine products
Home | Careers | Contact Us | Site Map
  • About Us
  • Trailers
    • Trailers for Aluminium Boats
      • Rollamatic Series
      • Loader Series
      • Nipper Series
      • Centre line Series
      • Sports Series
      • Glider Series
    • Trailers for Fiberglass boats
      • Supa Rolla Series
      • Aluminium Trailers
      • Glider Series
    • Trailers for Inflatable/Sailing Boats
      • Nipper Series
      • Sports Series
    • Foldaway Trailers
    • Aluminium Trailers
    • Select the Right Trailer
      • Deciding on the Right Trailer for you
      • Boat / Trailer match up guide 2010
      • Bow Eye to Transom
    • New Products
  • Options & Accessories
  • Hydrastar Brakes
  • Parts & Repairs
  • Owners Manual
  • FAQ’s
  • Dealer Locator
  • Gallery
  • Contact Us
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow

Dunbier 40th Anniversary

 

ct_catalogues2

 

What's New

 

Hydrastar Brakes: For Trailers Over 2000kg In Australia, 2500kg In New Zealand

What's stopping your trailer?

Hydraulic brakes with Dunbier's new 1200psi HYDRASTAR Trailer Brake Actuator

Step up to the next generation of hydraulic trailer brake actuators with the Hydrastar trailer mounted actuator. Unlike mechanical override brakes, the output from the Hydrastar actuator is adjustable from the driver's seat with electronic in-car controller to adjust the Hydrastar's output.


View Compatible Electronic Brake Controllers for use with Hydrastar


Download Service Manual On Carlisle Hydrastar

Vehicle Wiring Diagram

Download Customer Hydrastar Requirements 2222



hydrastar__
Newly Updated 1200 PSI Hydrastar Actuator Offers
  • Faster response for reduced stopping distance
  • Simplified wiring - only 4 wires
  • Draws power only when brakes are applied - no need for accessory switch
Compare these Hydrastar Advantages
  • Sealed unit
  • Does not exceed tow vehicle manufacturers' wiring amp rating
  • Unit mounted bleeder fitting simplifies brake bleeding
  • Works from brake controller in-car. Inexpensive to fit
Vastly Superior to Override Brakes
  • Eliminates the feel of being pushed by trailer, problems with backing a trailer uphill and brake drag
  • Easily replaces override brakes on trailer
Superior to Override Brakes and Easy to Install
  • Easily replaces override, air/hydraulic and vacuum/hydraulic systems. To install, simply mount the Hydrastar to the trailer and attach the hydraulic line
  • Only 4 wires to connect, 3 wires go to the tow vehicle receptacle, the fourth goes to the breakaway switch
  • Unit mounted bleeder makes bleeding the brake lines easier
  • Includes detailed instruction manual
Note that the tow vehicle must be equipped with an industry standard electronic brake controller.
Easy to Operate
  • Engages trailer brakes when tow vehicle brake pedal is applied or when the in-car controller override is activated
Dunbier Part Numbers:

1938 - Hydrastar Braking System (Boxed)
1939 - Hydrastar Braking System (Assembled)
1940 - Trailer Mounting Bracket for Hydrastar
1942 - Electric Brake Controller
 
© 2009 Dunbier Marine. All Rights Reserved.
Website design by FX Web Creations