Hydrastar Brakes: For Trailers Over 2000kg In Australia, 2500kg In New Zealand
Newly Updated 1200 PSI Hydrastar Actuator Offers
-
Faster response for reduced stopping distance
-
Simplified wiring - only 4 wires
-
Draws power only when brakes are applied - no need for accessory switch
Compare these Hydrastar Advantages
-
Sealed unit
-
Does not exceed tow vehicle manufacturers' wiring amp rating
-
Unit mounted bleeder fitting simplifies brake bleeding
-
Works from brake controller in-car. Inexpensive to fit
Vastly Superior to Override Brakes
-
Eliminates the feel of being pushed by trailer, problems with backing a trailer uphill and brake drag
-
Easily replaces override brakes on trailer
Superior to Override Brakes and Easy to Install
-
Easily replaces override, air/hydraulic and vacuum/hydraulic systems. To install, simply mount the Hydrastar to the trailer and attach the hydraulic line
-
Only 4 wires to connect, 3 wires go to the tow vehicle receptacle, the fourth goes to the breakaway switch
-
Unit mounted bleeder makes bleeding the brake lines easier
-
Includes detailed instruction manual
Note that the tow vehicle must be equipped with an industry standard electronic brake controller.
Easy to Operate
-
Engages trailer brakes when tow vehicle brake pedal is applied or when the in-car controller override is activated
Dunbier Part Numbers:
1938 - Hydrastar Braking System (Boxed)
1939 - Hydrastar Braking System (Assembled)
1940 - Trailer Mounting Bracket for Hydrastar
1942 - Electric Brake Controller
